|
Frybrid
manufacturers the worlds most sophisticated vegetable oil conversion
system for diesel engines. Each and every component of our systems
is designed to exceed its system requirements and each exceeds the
functionality of our competitor's components. The Frybrid system uses
4 individual heat-exchanging components and is controlled by a microprocessor
insuring that vegetable oil below the required temperature is never
injected into the vehicles engine. Our system is in fact so revolutionary
that we have applied for three patents on various components.
|
Most
systems rely on only a small in-tank heat exchanger to heat all
the fuel in the tank to injection temperature, the Frybrid system,
however, utilizes four. The first being a welded high efficiency
coiled heat exchanger in the aluminum, baffled tank with the fuel
pickup positioned directly in its center. This assures that all
fuel being drawn from the tank is liquefied and lessens the strain
on the injection pump and or fuel pump. This single heat exchanger
is more efficient than those used by any of our competitors. All
internal tank connections for both fuel and coolant are TIG welded
to insure a leak proof system. The integral fuel resovouir prevents
fuel starvation when cornering, stopping or accelerating when
low on fuel. None of the metals in contact with the fuel tank
are reactive and the heat exchanger has more than 30 sq ft of
surface area. |
|
|
|
Next is the Frybrid heated fuel line, this line is connected
directly to the top of the fuel tank, the line is made from
Aircraft aluminum fuel line running inside a ¾" coolant hose.
We have found this line to have better heat transfer than any
other line configuration.
|
| Next
is our Frybrid heated fuel filter, which incorporates a 14-plate
flow through heat exchanger through which all fuel must flow before
being filtered. This unit heats the fuel very efficiently insuring
that the filter will not slow the flow of fuel even in cold climates
and utilizes a readily available diesel filter element with an
integral drain. |
|
|
|
Lastly
we employ a final fuel heat exchanger which on its own is capable
of getting all fuel used by the engine to injection temperature
as soon as the engines coolant is at 180F. |
| The
Frybrid GEN-3 microprocessor is the world's first solid-state
vegetable oil fuel system controller and raises the bar in this
field. The Frybrid GEN-3 monitors engine coolant temperature and
seamlessly switches the engines fuel supply from diesel or Bio-diesel
to vegetable oil only when the vegetable oil is at the proper
temperature preventing the injection of cold vegetable oil which
results in engine damage. It also warns the operator if the vehicle
is shut down on vegetable oil, provides system status indicators
and automates the purge cycle allowing for faster engine shutdown.
Nothing else even comes close! |
|
 |
Here
at Frybrid our goal is to produce only the highest quality conversion
systems, systems that incorporate materials from the aviation,
automotive and electronics industries and are constructed to the
highest specifications. Our systems are not the least expensive;
they are however, the best. We do not use floor-heating tubing
for fuel line or transmission coolers dangling in plastic outboard
fuel tanks. We do not require that you heat all the fuel in the
tank before you switch fuels, or worse yet, manufacture a system
which is not capable of heating the fuel sufficiently. What we
do is manufacture a system which works, and works very well. A
system, which prevents the engine damage associated with other
systems, a system I trust enough to have my family use everyday.
|
Christopher
Goodwin
Owner
FRYBRID
|
